Life is a special occasion

Showing posts with label Money Saver. Show all posts
Showing posts with label Money Saver. Show all posts

DIY: Scratch Off Ticket


The name says it all. And Art Mind -who also has a shop on Etsy- teaches you just how to make a scratch off lottery ticket. There are about one million and one uses for this: baby shower, dinner party, wedding, birthday party, cards, promotional tool. This is just the coolest tutorial I have seen in a while and you can change it up to suit your event. Enjoy!

DIY: Pendant Lamp


I was reading a posting from The Estate of Things on making a pendant lamp. Immediately, I thought this would be a perfect piece to decorate an event. The original idea comes from Crafty Nest. She used a large bouncy ball, clear drying craft glue, hemp string and a light fixture. The size of the ball and the type of string and light fixture used can be tailored to fit the decor of the specific event. Previously, I wrote a post on this same type of project, however. It appears that Ready Made has since taken that project down, so enjoy!

DIY: Light Bulb Vase


Design Sprout posted this adorable alternative to CB2's teardrop hanging vase, which costs $4.95 each. This would be a great way to decorate any party. The vases could have ribbon wrapped around the top, flowers hanging out or floating inside. There are a lot of individual twists you could use to make this even more fabulous!

Supplies
via Isn't She Lovely

•A metal saw
•A light bulb
•2 screwdrivers (small and large)
•A round file
•Metal wire (beading or fishing wire should work)

Directions
translated to English from Esprit Cabane

•Saw the base of the screw cap with a metal saw, turning the bulb regularly, so you remove the electrical contact part.
•Once the base of the screw cap is cut, insert a screwdriver and break the glass tube that sticks out (be careful).
•Then, place a larger screwdriver in the cavity of glass, pushing down firmly, so the filament is separated from the bulb.
•With a round file, enlarge the opening and take out the filament. The bulb should be empty now.
•To create suspended vases, drill two holes by hand on both sides of the screw cap with a drill bit. The aluminum should pierce easily.
•Slip metal wire (or fishing wire) through the holes that you punched and tie a knot on each side (like a purse strap).
•Then suspend the vase from a hook, or wherever you like.
•Put a little water in the bulb and then some flowers.

DIY: Outdoor Cabana


Do you have two days, $300 bucks and a friend? Then why not build your own cabana for your dinner party this weekend! Sunset posted a fantastic DIY project on how to build an outdoor cabana. They supply you with the checklist of the necessary tools and materials and you can transform your outdoor space into an instant retreat.

DIY Skirts


Here is an unwritten rule about being a woman and working in special events...you cannot be scene in the same outfit twice. Sounds superficial, and I am sure there are people who disagree with this but ultimately, it's the truth. Why else do women wake up earlier than they need to in the morning? They do this to allow enough time to browse their wardrobe and put together a new outfit combination. Or if you're like me, you stay up later in the evening to find a new combination. It is also the same reason why women buy a new dress before a dinner party, or a date, or an important meeting. However, in reality, most women can't afford to ensure that they are never scene wearing the same outfit twice. What to do, what to do?

Well lately, I have been thinking about sewing. Not only sewing clothing but hand bags, tablecloths, draping, napkins, invitations. Everything! And recently I came across a tutorial on how to sew your own skirt from Grosgrain. This tutorial is fantastic and - dare I type - easy?!?!? Now, not only do I want to go out and buy a sewing machine but I want to become a fashion designer. Okay, I am not going to give up my day job but sewing could be both practical for my career while also developing into a fun addition to my hobbies. One of my new goals is to sew my own linens for Lauren Daversa Events.

Look at the skirts featured on Grosgrain which were sewn in under half an hour. The blog is filled with tutorials, inspiration and possibly the solution for women everywhere on how to never be scene wearing the same outfit twice!

Affordable Spotlights


Lighting can make or break any event. May times, it is left out of events because the cost can be very expensive. But it doesn't have to be. There are a lot of DIY projects that can bring all the drama without taking all of your bucks. For instance, Jamali Garden, one of my favorite companies, has a set of 3, Acolyte E-SpotLytes for $55. That is a fantastic deal considering the hundreds of dollars some companies charge. These lights are encased in a silver finished body and have 20 super bright white LED lights that are pivoted for precise focal points. And the best part, it uses 3 AA alkaline, replaceable batteries and the battery life is about 8 to 10 hours. FAB-U-LOUS! Oh the possibilities!

DIY Outdoor Chandelier


I love this idea, and can't wait to present it to one my clients in particular who will be head over heels. Apartment Therapy by way of Sunset Magazine posted the idea. It is a simple candle chandelier, perfect for an outdoor wedding or event where the money for an electric version is not there. All you need is a wire basket, a few jam jars, and some pretty crystals. Pick out a wire basket with a handle and a flat base. You can find some in any home and garden shops such as Crate & Barrel, online auctions or thrift stores. It's great to find one designed to hold glassware or small pots ― the built-in partitions will hold the jars in place. Then hang crystals from the base and top. For a real Cinderella look, loop two strands of glass beads across the bottom. Attach your chandelier to a patio roof or tree with a length of matching chain (or use a metal plant hanger). Pop tea lights or votives into the jars, light the candles, and enjoy the glow.

DIY Photo Sharing Kiosk


How many pictures will be taken by the guests at your next event or your wedding wedding? Probably hundreds to thousands. Wouldn't you like to have them? Of course you would. Well, good luck getting them! Okay, okay, okay- maybe your family and friends represent the one percent who will actually send all the shots they snapped at your event BUT most likely they will forget. Not maliciously of course; I'm no stranger to forgetting to send pictures. 

What to do - what to do - what to do? You could rent a Kedai for $499. A very nifty device, which also comes with a high definition monitor for immediate viewing pleasure. All you do it order the machine, Kedai sends it. Simple; a little pricey but simple.

Or, how about making your own photo sharing kiosk? Sounds more difficult than it is. All you need are three things: a laptop, a card reader and a family or friend appointed computer guard. Yup, that's it. Make sure to inform your guests about the download station, or else you wont get any pictures. If you have a DJ, they will be able to make announcements throughout the night. If not, set the station up by the exit and ask the computer guard to remind the departing guests. Then enjoy ALL your event pictures...for F-R-E-E!

DIY Event Centerpieces: J-E-L-L-O


I've been doing some research for inexpensive yet chic centerpieces for a few of my upcoming events. I think I hit the nail on the head. Rachel Ray had a posting on jello centerpieces, and maybe I've been burning the candle at both ends lately but I think they look tres cool! Evette Rios, one of Rachel's go-to design gurus who I am now going to do a little research on, concocted this idea and really elevated the translucent dessert to art. Here are the simple directions:

Instructions

  • Combine six boxes of Jell-O powder with half the amount of water specified.
  • Chill the mix in a glass vase for half an hour
  • Push flowers into the semi-firm gelatin.
  • Design your own — in any color!

Jello is about as inexpensive as it comes, and is available in a million colors. Fruit, flowers are just a few interesting items that could be submerged. Can't wait to try this out!

Affordable Event Decor

Who says event decoration needs to be expensive? Walmart doesn't. They offer a very affordable, and very adorable, Martha Stewart collection.  There are a lot of items to choose from but the two that jumped out at me were the set of 3 eyelet-pattern lanterns or a 6 piece lantern polka dot lantern set, both sell for under $12!  They would perfect to spruce up a birthday party, baby shower, wedding, dinner or cocktail party...

DIY Chandelier


This DIY project will add rustic charm to an event on a realistic budget. Natural Home Magazine, I have NO CLUE how I ended up on this site, posted the adorable project which utilizes used baby food jars, twisted wire, repurposed barrel hoops and some rusty chain. If your venue allows candles, this chandelier will be a special detail that wont not go unnoticed.

Materials
Tie wire (about 40 yards)
15 to 18 baby-food jars
15 to 18 votive or tealight candles
2 barrel hoops
6 eyehook bolts (black or rusty, if possible)
12 nuts to match the bolts
About 9 feet of lightweight chain (dark or rusty, if possible)
Large S-hook

Tools
Wire cutters
Needle-nose pliers
Jigsaw with metal-cutting blade for barrel hoops (if needed)
Clamp
Drill
Wrench

Instructions
1. Measure and cut two 24-inch lengths of tie wire. Make a loop in the center of each wire. Place one loop over the neck of a baby food jar and tighten slightly. Then put the other loop over the neck in the opposite direction. Cinch down.

2. Pulling the loops tightly, twist the end wires around each other to secure the wire on the jar neck. Using needle-nose pliers, tighten loops.

3. Bend the lower wire on each side up so it shoots straight up from the jar. This wire should measure about 8 inches; cut if necessary. Bend the other two wires out horizontally from the jar. Cut these to be about 5 inches long.

4. Grab the tip of the vertical wire and curl it outward to form a spiral. The finished spiral should be about 1 inch across and have about three twists.

5. Spiral the shorter, horizontal wires to about the same size as the ones above, but curl them inward this time.

6. Repeat the spirals on the two remaining wires to make a symmetrical holder. You could stop here and use this wire-topped jar as the votive holder
shown above. To make the chandelier, repeat with all baby-food jars.

To create chandelier:

7. Cut a 20-inch piece of wire and make a loose loop in its center. Loop it over the two top spirals as shown.

8. With the pliers, make three tight twists at the loop’s neck. Create an oval about 3 inches long. Twist to close the oval, then make 12 to 14 twists in the two wires to create a 3-inch twisted section.

9. Use the pliers to bend the twisted portion down as shown. Leave a few inches of wire beyond the twists. Bend the remaining wire ends into 90-degree angles. Cut each end so that about 1 inch of wire extends beyond the bend. Make a small hook on the end of each wire. The hooks should face forward. They clasp onto the wire loop to lock the candle-holder to the hoop of the chandelier. Repeat steps 7 to 10 with all votives.

10. Clamp the overlapping ends of the metal hoop to your work surface and drill a hole through both layers.

11. Thread a nut onto the neck of the eyehook bolt, then push the bolt through the hole. With a wrench, fasten the second nut on the end of the bolt to sandwich together the two layers of hoop.

12. Measure the circumference of your hoop. Drill holes in the hoop at 1⁄3 intervals and affix an eyehook bolt at each position. The chains attach to these bolts. Repeat with second hoop.

13. Insert a link through the bolt’s eye to attach the chain to the bottom hoop.

14. To attach the top hoop, thread the bolt’s head through the chain’s link.

15. All three chains meet at the top in an S-hook from which the chandelier hangs.

16. To complete chandelier, first hang your hoop structure where you like it. Then attach votives evenly—we hung six on the top hoop and 12 on the bottom. To attach votives, wrap the bent, twisted section of wire over barrel hoop and clasp wire ends to underside of hoop.

Set up

The chandelier’s simple structural base is made with two hoops; the top hoop has a smaller diameter than the bottom one. Three pieces of 36-inch chain connect them. The three lengths of chain join at the top in an S-hook from which the chandelier hangs.

We made this chandelier using two steel hoops from a decrepit oak half-barrel planter that had weathered many Colorado winters. You will likely need to cut one or both hoops down to size using a jigsaw fitted with a metal blade. The diameter of one hoop should measure 17 inches and the other 24 inches; add an extra 4 inches so the metal ends overlap at the joint.

DIY: Programs That Double As A CD

Style Me Pretty posted an incredibly chic idea for a wedding ceremony program that doubles as a favor. The idea was created by Bliss Weddings Market and the instructions are detailed below. Hate ending a sentence with a preposition but you learn the rules to break them!

Materials
Paperboard CD case (from www.BlissWeddingsMarket.com)
Two 1/8″ wide circle eyelets in the color white (from www.BlissWeddingsMarket.com)
Eyelet Setter (from www.BlissWeddingsMarket.com)
Rubber stamp (from www.SimonStamp.com) of your desired image (from
www.BlissWeddingsMarket.com)
One 28″ long ribbon not wider than 3/8″ or 5/8″ (from Michael’s)
Clear embossing ink (from Michael’s)
Embossing Powder in the color of you choice (from Michael’s)
Embossing Heat Gun (from Michael’s)
Pair of scissors or an X-acto ® knife (from Michael’s)
Scrap paper (from Michael’s)
Paper cutter (from Michaels)
Ruler (from Michaels)
Pencil (from Michaels)
Pinking Shears (from Michaels)
Mailing labels (for your CD playlist) (from local Office Supply store)
8-1/2” x 11” decorative paper for the ceremony program (from Michaels)
8-1/2” x 11” vellum paper for the program cover (from Michaels)
8-1/2” x 11” decorative paper for your handmade thank-you note (from Michaels)

Instructions
1. Place the CD case on top of the scrap paper.
2. Using the clear embossing ink, rubber stamp the image onto the front of the CD case.
3. Generously sprinkle the colored embossing powder over the stamped image.
4. Slide the loose powder onto the scrap paper below.
5. Hover the embossing heat gun over the image as the powder melts producing a metallic, raised image.
6. Put CD case aside to let it cool.


7. Print your CD playlist onto mailing labels.
8. Cut them out using pinking shears to create an interesting edge.
9. Affix the playlist to the inner left side of the CD case.
10. Using your favorite word processing software, design your ceremony program and print it onto your decorative paper.
11. Place the vellum paper behind the ceremony program. Using the paper cutter, slice the papers together to measure approximately 5” wide x 10” long.
12. Place the papers in the interior center of the CD case.
13. Using your pencil, make a mark on the ceremony program 3/4” down from the top of the CD case’s spine and 3/4” up from the bottom of the spine.


14. Using the the tip of scissors (or an X-acto ® knife), carefully poke a small hole where you made your marks. (A hole puncher will not do – the size of its hole is wider than the spine of this CD case.)
15. Insert the eyelets into the top and bottom holes. Make sure the back of the eyelet is facing you.
16. Place the eyelet setter over the top eyelet. Using a blunt object, hammer the setter to flatten the backside of the eyelet. Repeat with the bottom eyelet.
The back of the eyelets should look like a “flower” and will permanently adhere the papers to the interior of the case.
17. To complete the case’s binding, thread your decorative ribbon through the eyelets and make a bow-tie on the side of the case.
18. Insert your personalized audio CD in the interior left pocket of the CD case.
19. Compose a thank-you note to your guests and insert into the inner right pocket of the CD case.

Take A Tax Deduction Off Of Your Wedding Expenses


You probably thought the last thing to add to your wedding to do list was to sit down and visit with your tax expert. This is one meeting you might not want to skip. Speaking with a tax expert before planning your wedding can save you some money and benefit some great charities all at the same time.  Here are eight money saving tips to try to incorporate into your event.

1. If you have your reception at a museum or public owned historic landmark or house, it is often a tax deduction for the free you pay to the historic society that owns the reception facility. Investigate this in advance when picking a reception locale. Many museums and are owned by non-profit organizations, so the rental fees will benefit the upkeep of the museum and are often considered a donation and therefore are usually a tax deduction . Speak to your accountant and see what venues count as a tax deduction.

2. According to Martha Stewart website that has 50 ways to save money at your wedding, after the event, if you donate your flowers to a hospital or nursing home is a tax deduction.

3. After the wedding, donate your wedding dress to a charity that resells wedding dresses and proceeds of the gowns go to charity, and its' retail value will be a tax deduction.  One organization is Bridal Garden that accepts dresses for donation to benefit disadvantaged children via the Sheltering Arms Children's' Service. 

4. Bridesmaids dresses, purses and shoes can be donated to the proms for unprivileged groups. One example is the Fairy Godmothers' charity in Flagstaff, Arizona. They take gowns, shoes, purses and jewelry from around the country. Check your local phone book to find a charity near you.

5. Instead of favors, a donation can be made in the guests name to a favorite charity. Many charities and organizations also make items that make great favors and wedding gifts that subsidizes the charity. 

6. Shop with vendors that donate to charities, such as The Greater Good, or the shop.com catalog or museum gift shops.

7. Look into the I do foundation for setting up a memorial fund or donations to your favorite charities when people buy your wedding gifts from your Home Depot, Amazon, Target, Mikasa, Gaiam, JCPenney and others. Plus you give 10% when you buy wedding invitations and wedding favors.

8. You will likely want to keep certain items from your wedding day ensemble, if they are not particularly sentimental such as your money bag or shoes or wedding slip, perhaps you can find a consignment shop that donates proceeds to charity such as Good Will or Salvation Army. They will help a good cause and another bride to be will be happy to have found a bargain.

Article Courtesy of Associated Content by Nom
Photo Courtesy of Grove Pashley Corbis

Adorn Brides


Champagne taste and beer bottle pockets? Adorn Brides can help, at least for the evening. Shop, rent, wear and return. It's that simple to have beautiful jewelry to wear on your wedding day, or any special event. I like the Beckford Necklace, a beautiful sapphire and diamond necklace in white gold.  Simply lovely.  Easy to wear, yet so hard to return!

DIY: Japanese Kusadama Balls


It's all in the details. This is one of the most important, if not the most important, thing to remember when planning any event. It is those same details that can add up, and fast too. Japanese kusadama balls are an affordable way to decorate a wedding ceremony, baby shower, birthday party event a cocktail party without breaking the bank. The Japanese kusudama is a paper ball made out of multiple identical origami shapes glued together. They were traditionally used as a ball for incense or potpourri but now we see them more for decoration or as a gift. There are many different patterns to make a kusudama ball. Folding Trees has a great tutorial kusudama balls. Click here for part one on how to learn to make the traditional Japanese shape and here for part two.

Stock-The-Bar Party


Moving into a new home conjures up a whole lot of new expenses, especially if the house is bigger than your last one. Invite guests over for a stock-the-bar party for a quick way to get your home bar up to snuff without breaking your bank. Or, try the same idea with different events like a coed bridal shower; same ideas, works for all types of events!

Things You’ll Need:
Party Favors
Guest List
Invitations

Step 1
Decide if you want a theme for your party. Stock-the-bar is a theme in itself, but you might want to give your event a twist. Choose something that will be fun for you and your guests.
Step 2
Plan to have the party at a time that shows off your house best. If you have a great backyard, have a daytime stock the bar party. To show off your amazing living room, consider an upscale nighttime party.
Step 3
Create a guest list. Make sure you invite plenty of people so you can get enough gifts to fill your bar.
Step 4
Send invitations that explicitly say that this is a stock-the-bar party. You don't want to be coy or people won't know to bring gifts.
Step 5
Make a list of supplies you need for the party, so you don't forget anything. Include enough wine and liquor for the night, so you don't have to break open any new (or expensive) bottles if you don't want to. Remember to buy mixers for cocktails.


Step 1
Consider having a mixed shower with both men and women. This is becoming more fashionable, plus it allows for a great stock the bar party. Like any cocktail party, the host and hostess should hold the party in their home during the evening.
Step 2
Let guests know where the couple is registered so they can bring bar ware and accessories along with bottles of wine or liquor.
Step 3
Make sure the theme suits the couple. If they are wine lovers, plan a wine oriented stock-the-bar party. Purchase several wines to showcase during the event and provide great cheese and chocolates as accompaniment.
Step 4
Decide if you want to include traditional bridal shower games at the stock-the-=bar party. You may want to forgo these for activities that better suit the theme.
Step 5
Have custom party favors created with the couple's name and wedding date. To save money on screen printing, you can always create labels yourself to add to gifts.



Invitations Courtesy of Party Invitations
Article Courtesy of E How

DIY: Photo Frame Card Box

I am always praising The Knot so why would today be any different! The same Knottie that posted on how to create your own monogram aisle runner, also posted on how to create your own photo frame card box. Again, if you've got the extra cash to spend on purchasing one, woo-hoo. But this is such a simple project and would be a lot of fun for the bride and groom to do together. If you are going to use this for a birthday party, it would be a great project for father / daughter or mother / son. For those of you who are not partial to DIY projects, check the wedding boards to pick up a used one. However, if you'd rather spend a fraction of the cost, and think you can handle a little work then read on...

ITEMS YOU'LL NEED:
4 Photo Frames
Suggestion: 8"x 10" or 11"x 13", whichever you prefer but keep in mind that the 8x10 is already quite a large box
Drill
Screw Driver
16 L Brackets
Screws
Suggestion: In terms of width, use the size recommended by the L brackets. Also, be mindful of the length because you don't want them to go through the front of the frames.
Lazy Susan, optional
Suggestion: check out Walmart
Foam Board
Suggestion: check out Michaels
Batting material for the "cushion" on the top of the box
Fabric, one yard will be ample
Suggestion: try Joann Fabrics and select fabric that follows the color theme of your event
Suggestion: one yard is ample
Exacto Knife
Scissors
Stapler
Duct Tape

INSTRUCTIONS
1. Start by putting the frames together. Measure down on the frame where you want to drill the pilot holes for the screws so that the L brackets will be even to connect the frames together. Mark the spot with a pencil.


2. Drill the pilot holes into the frames. Use a drill bit size recommended on the box of screws purchased. Make sure you do not drill straight through the frame by marking the frame and only drilled up to the tape line.


3. Once all of the pilot holes are in place, start screwing the brackets onto the frames. At this point, it should look pretty "complete"--the photos and glass will be in, and your box will be solid.NOTE: Clean the inside of the glass, insert your photos before screwing them together. Do not put the frames together empty because there may not be enough overlapping to squeeze the glass and backing back into the frame. IE, you might have to take the frames apart to actually put the photos in.


4. Next, start on the top. Measure the space in the top of your frames, and measured the foam board to correspond with that. You may have to shave a little extra off of the foam board in order to make a little room for the fabric you will use to upholstered it with later.


5. Remember to cut a hole in the middle of the foam board for the cards. Make it fairly big, but not big enough for hands to fit inside.


6. Place the piece of foam board that was just cut down on the table and lay the batting material over it. Cut around the edges, and give yourself enough extra material all the way around to be able to fold it under the bottom of the box top.


7. Start to fold and staple! Stretch the fabric around the box top and staple it to the back side. You're basically upholstering the box top. You also have to cut a slit in the middle of the material for the slit in the middle of the foam board. Just pull the edges of the fabric through and staple to the inside of the opening.


This is what it looks like when it's done.


8. Repeat steps 6 and 7 with your matching fabric.

9. Cut out a piece of foam board, there is no need to cover it in fabric. This will fit inside the frames for the bottom of the box.

10. Now, attach the top. There are a few different ways. Some people Velcro the top and bottom directly to the top of the frames, or you can attach additional L brackets to the bottom and top sides of the frames to hold the bottom and top in place. See the photos below.


View of the inside of the box from the top. The bottom is already in place, but you can see the additional L brackets put in place to hold the top of the box in place. This way it will not fall down inside of the box.


This is a photo of the box turned upside down. Here you can see the L brackets attached to keep the bottom in place.

11. Secure the foam board for the bottom to the bottom of the box. Use duct tape and taped over the L brackets. It's important not to completely ruin the frames if you want to take the box apart and use the frames after the even so don't tape anything directly to the box.


12. Attach the lazy Susan to the bottom of the box. This is another area where you may need to improvise. There could be a dip in the lazy Susan and the middle of it might not touch the box and will make it difficult to attach. Cut a few square pieces of the foam core and tape them to the lazy Susan to build up the middle. Then roll little pieces of duct tape and stuck them to the foam board and tape it to the bottom of the box. Use a lot of duct tape to ensure its sturdiness. NOTE: if you don't want your box to spin, you don't need a lazy Susan.


This is the taped-up lazy Susan right before it was turned over and attached to the bottom of the box.


13. Turn your box back over, place the top on, and it's finished!


The finished product.


This is a view of the finished top of the box.


Another angle of the finished box.

Thank you Road To the Aisle for such detailed and helpful posts!!! Here is a second posting from another DIY Bride.

L | D Finds: Pre-Owned Wedding Dresses

Many brides suffer from a case of champagne taste and beer bottle pockets when they are on the hunt for their dream wedding dress. While other brides just don't feel like, or can't afford to shell out big bucks on a high end gown. Well, where there's a will, there a way. And that way is by visiting Pre-Owned Wedding Dresses. They are a listing service designed to connect buyers and sellers of new, sample and used designer wedding dresses. For a fraction of the cost, you can pick up a designer dress by Badgley Mischka, Carolina Herrera, Demetrios, Monique Lhuillier, Oscar de la Renta, Pronovias, Vera Wang and on, and on, and on. And if you've already worn your dream dress, sell it to another happy bride and use the money for something practical like more honeymoon souvenirs! There is a $26 listing fee and no commission charge.

The most popular reason women sell their gowns is to give someone else a chance to enjoy it, broken engagements, a belief that it is not practical to keep it and being a two dress bride. Whatever your reason is, for selling or buying a pre-owned dress, it's worth it to at least check it out.

Not totally convinced yet, the Carolina Herrera, A-Line gown in Rice Taffeta, with champagne pleated taffeta bow detail and chapel train pictured above was originally priced at $2,500 and is being sold on Pre-Owned Wedding Dresses for $875. The best part, the gown has never been worn and has had no alterations.